Skip to content
YOTIN An Indigenous Energy Services Company
  1. Home
  2. WellFi

WellFi wireless downhole telemetry

WellFi is a wireless downhole telemetry tool that reports pressure, temperature and produced-fluid condition to surface. It sends its readings wirelessly up through the formation itself to a receiver at surface, so there is no downhole cable to run, clamp or damage.

Now booking installs. Request a well review

What it measures

WellFi measured channels
ChannelWhat it reports
PressurePump-intake and reservoir response pressure at the lift point
TemperatureTemperature trends at tool depth and operating interval
Fluid levelFluid over the pump, worked out from intake pressure, so a pump-off shows before the pump runs dry
Fluid compositionProduced-fluid composition changes from the tool location or paired layouts
Flow insightInterval behaviour interpreted from paired pressure and fluid-condition trends

Specifications

WellFi specifications
PropertyValue
Pressure rating10,000 psia
Temperature rating150 °C
Tool outer diameter46 mm
Battery life5+ years
Surface outputMODBUS RS-485 / 4-20 mA

WellFi is rated to 150 °C. A higher-temperature version for thermal and SAGD service is in development and is not available today.

Installation

WellFi runs on the tubing string. The collar is made up into the string, or strapped to the tubing OD inside casing, subject to casing size — confirm per well. It is most often run on a new completion or during work that is already scheduled, such as a planned progressing cavity pump changeout or a workover, so no separate intervention is required. It can also be installed on its own run.

Where it fits

It suits heavy-oil wells on progressing cavity pumps, including cold-production open-hole multilaterals in the Clearwater and Mannville.

WellFi is a production monitoring tool. It is not an MWD/LWD drilling service, not a wireline logging service, and not sand-control or flow-control hardware.

Data path to surface

  1. The tool sends its readings wirelessly up through the formation.
  2. A surface receiver and ground reference decode the telemetry and output it over MODBUS RS-485 or 4-20 mA to the existing RTU or SCADA system.
  3. The WellFi Access Portal also analyzes the data and returns recommendations on drawdown, fluid level and produced-fluid trends.

Track record

160+ international installations

Yotin Energy is the exclusive Canadian distributor of WellFi.

Contact

Yotin Energy
Pierceland, Saskatchewan, Canada
Email: sales@yotinenergy.com
Phone: +1 403-679-5330

To review a candidate well, request a well review on the homepage.

← Back to yotinenergy.com

YOTINAn Indigenous Energy Services Company
WellFi Specs Benefits Our Company Contact

© 2026 Yotin Energy. All rights reserved. Privacy